Differences

This shows you the differences between two versions of the page.

--- bldg_lock [2016/05/27 14:01] – created scottdf
+++ bldg_lock [2026/01/08 18:37] (current) – scottdf
@@ Line 4: / Line 4: @@
 ===== Lights & Thermostat Location =====
-Light switches and thermostat are located at the blue arrow on the diagram.
+  * Light switches and thermostat are located at the blue arrow on the diagram.
+  * Additionally, all lights in the suite next door must be turned off.
 ----
@@ Line 23: / Line 24: @@
 ----
 ===== Thermostat =====
-==== Normal Operation ====
+==== The Thermostat Is On A Schedule ====
+  * In general, no changes are required
+  * Sunday temperatures are maintained from 8:00 AM to 1:00 PM
+  * Wednesday temperatures are maintained from 6:30 PM to 9:00 PM
-The thermostat is set on a timer and will run automatically during normally scheduled times. State law requires the fan to be on while the building is occupied and that is the normal setting.
+==== Temporary Adjustments For Comfort ====
+  * Press the ''Up'' or ''Down'' arrows to set the desired temperature
-==== Overriding the Program Settings ====
+  * When you leave, the setting will return to Away by itself
-If you are in the building during times other than the normal Sunday & Wednesday hours, you can override the settings by pressing the override button located below the Up & Down buttons.
-The Override button is used to force the thermostat from Unoccupied mode into the Occupied 1 mode comfort settings. The Override period will be set at 30 minutes. The thermostat will then return to Unoccupied mode. To increase the amount of time in Override mode, press the Override button again. Thirty minutes of override time will be added for each time the Override button is pressed up to a maximum of 4 hours. After the 4-hour limit has been reached, press the Override button again to cancel override mode.
-While in Override mode, the Override icon and the Occupied 1 icon will be displayed on the thermostat. The time
-of day and the minutes remaining in Override mode will alternate on the thermostat display.
 The instruction manual for the thermostat is here: {{wiki:thermostat.pdf}}