Building Opening & Closing

Light switches and thermostat are located at the blue arrow on the diagram.

There are 5 exit doors, as indicated on the diagram.

• Door #1 is the main door and should be unlocked with the key
• Door #4 should be unlocked by turning the lock button to vertical and lifting up on the handle. The button will pop out.
• The other 3 doors do not need to be unlocked, but can be used as exits.

• Lock door #4 by pressing in the button and turning it horizontal.
• Check the other 3 doors to be sure they are locked and closed.
• Lock door #1 with the key.

• Turn the Fan to On
• Press the Up or Down arrows to set the desired temperature (for cooling 73° has been comfortable for everyone)
• Press Hold to maintain the setting

When you leave the building:

• Press Run to cancel the Hold setting
• Turn the fan to Auto

The instruction manual for the thermostat is here: thermostat.pdf